Skip to product information
1 of 4

Robocraze

HX711 Load Cell Module

HX711 Load Cell Module

Regular price Rs. 40
Regular price Rs. 70 Sale price Rs. 40
Sale Sold out 43% off Best Price Guaranteed
You save Rs. 30
Incl. GST (No Hidden Charges)
Currently, people are actively checking out this product.
Submit your Bulk Enquiry Here

Contact form

  • Recommended excitation voltage is 5-10V.
  • Two selectable differential input channels.
  • On-chip active low noise PGA with a selectable gain of 32, 64 and 128.
  • On-chip power supply regulator for load-cell and ADC analog power supply.
  • Selectable 10SPS or 80SPS output data rate.
  • On-chip oscillator requiring no external component with optional external crystal.
  • On-chip power-on-reset.
  • Simple digital control and serial interface: pin-driven controls, no programming needed.
  • Simultaneous 50 and 60Hz supply rejection.

HX711 Load Cell Module

The HX711 Dual-Channel 24 Bit Precision A/D weight Pressure Sensor Load Cell Amplifier and ADC Module is a small breakout board for the HX711 IC that allows you to easily read load cells to measure weight. By connecting the module to your microcontroller, you will be able to read the changes in the resistance of the load cell with some calibration. You’ll be able to get very accurate weight measurements.

This can be handy for creating your own industrial scale, process control, or simple presence detection. The HX711 Weighing Sensor uses a two-wire interface (Clock and Data) for communication. Any microcontroller’s GPIO pins should work and numerous libraries have been written making it easy to read data from the HX711.

Load cells use a four-wire Wheatstone bridge to connect to the HX711. These are commonly colored RED, BLK, WHT, GRN, and YLW.

Analog Sides:

  • E+: Excitation positive.
  • E-: Excitation negative.
  • A-: Channel A Negative Input.
  • A+: Channel A positive Input.
  • B-: Channel B Negative Input.
  • B+: Channel B positive Input.

Digital Sides:

  • GND: 0V / Ground Power Connection.
  • DT: Data IO Connection.
  • SCK: Serial Clock Input.
  • VCC: Power Input.

Also check The 10kg load cell with an HX711 weight sensor is a device that can be used to measure weight. It is made up of a load cell, which is a sensor that converts force into an electrical signal, and an HX711 weight sensor, which amplifies and converts the load cell's output into a digital signal that can be read by a microcontroller.

Package Includes:

  • 1 x HX711 Load Cell Module

Specifications:

Data accuracy 24 Bit
Refresh frequency 80 Hz
Operating Voltage 5V DC
Operating current <10 mA
Dimensions 38mm x 21mm x 10mm
Weight  15 grams

Shipping & Returns

  • All orders confirmed before 3 pm IST are shipped on the
    same day, barring rare pickup delays on holidays or disturbances
  • Delivery time in Metro cities is 1-3 days, Others it is
    3-7 days. It varies based on location, reliant on courier services
  • Return window: 7 days from receipt unless stated
    otherwise. No refunds/replacements after
  • Returns only for non-working/damaged products are accepted
  • Initiate return requests to our customer service team via Support ticket or contact us at +91-8123057137
  • Refunds are processed within 3-4 working days post inspection and approval.

For more details, please check our Shipping and Return Policy

View full details

Found a better price?

Let us know!
We'll try to match the price for you

  • ⚡ Dispatched within 24 hours

  • 💰 Earn RC Coins on every purchase

  • 🚚 Free shipping on orders above Rs 500/-

  • 🛠️ Dedicated Technical Support Team

1 of 4

1. How does an HX711 load cell work?

  • The HX711 is a 24bit ADC that amplifies and digitally converts the output of the load cell. Then this amplified value is fed to the Microcontrollers, you can read the changes in the load cell's resistance with some calibration.

2. What is the HX711 weight sensor?

  • The HX711 is a 24-bit analog-to-digital converter (ADC) designed to interface directly with a bridge sensor in weighing scales and industrial control applications. With some calibration, you will be able to read the changes in the resistance of the load cell by connecting the module to your microcontroller.

3. How to Install HX711 Library to Arduino IDE?

  • Follow the below mentioned steps to install HX711 Library to Arduino IDE.
    • Download the library from the web
    • Open Arduino IDE. 
    • Choose HX711-master. 
    • Open a new sketch and save it as "Weight_Scale”.
    • Add the library to your sketch, type #include <HX711. 
    • After adding the library, add the code that initializes library functions.

4. What is the use of the HX711 module?

  • The HX711 module is a Load Cell Amplifier breakout board for the HX711 IC that allows you to easily read load cells to measure weight. The HX711 Load Cell Module can be used for creating your industrial scale, process control, or simple presence detection.