22-03-2024
It's a very good sensor
I received the sensor on time, and it's working perfectly.
Robocraze
Optical Dust Sensor with Cable
Optical Dust Sensor with Cable
Low stock: 2 left
Regular price
Rs. 405
Regular price
Rs. 549
Sale price
Rs. 405
Unit price
per
Incl. GST (No Hidden Charges)
Currently, people are actively checking out this product.
Couldn't load pickup availability
Contact form
- It requires power supply voltage of DC5 ± 2V.
- An infrared emitting diode and an phototransistor are diagonally arranged into this device. It detects the reflected light of dust in air.
- The minimum detection level of particles: 0.8 m.
- Clean air voltage is 0.9V typ.
- GP2Y1010AU0F is a dust sensor by optical sensing system
- Low consumption current (Icc: MAX. 20 mA).
- The presence of dust can be detected by the photometry of only one pulse.
- Enable to distinguish smoke from house dust.
Optical Dust Sensor with Cable
This PM2.5 GP2Y1010AU0F Dust Smoke Particle Sensor is an infrared emitting diode (IRED) and a phototransistor is diagonally arranged into this device. It detects the reflected light of dust in the air. Especially, it is effective to detect very fine particles like cigarette smoke. In addition, it can distinguish smoke from house dust by the pulse pattern of the output voltage.
The module is mainly used for dust removal equipment alarm equipment, air purification equipment, dust robots, fire alarm, etc. industry equipment can detect smoke particles, pollen spores, and other particles. The sensor has a very low current consumption (20mA max, 11mA typical), and can be powered with up to 7VDC. The output of the sensor is an analog voltage proportional to the measured dust density, with a sensitivity of 0.5V/0.1mg/m3.
Applications:
- Detecting dust in the air.
- Air purifier, Air conditioner, the Air monitor.
- Fire alarm
- Dust robots
Package Includes:
- 1 x Optical Dust Sensor
Specifications
| Sensor | Optical Dust Sensor |
| Power supply voltage | DC5 ± 2V |
| Sensitivity | 0.5V / (0.1mg / m3) |
| Dimensions | 5 x 4 x 3cms |
| Weight | 25 grams |
Shipping & Returns
Shipping & Returns
- All orders confirmed before 3 pm IST are shipped on the
same day, barring rare pickup delays on holidays or disturbances - Delivery time in Metro cities is 1-3 days, Others it is
3-7 days. It varies based on location, reliant on courier services - Return window: 7 days from receipt unless stated
otherwise. No refunds/replacements after - Returns only for non-working/damaged products are accepted
- Initiate return requests to our customer service team via Support ticket or contact us at +91-8123057137
- Refunds are processed within 3-4 working days post inspection and approval.
For more details, please check our Shipping and Return Policy
Found a better price?
Let us know!
We'll try to match the price for you
1. What is the basic working principle of the optical dust sensor?
- The air enters the sensor through an air inlet valve, where an infrared LED light is turned on and off repeatedly. The dust particles in the air are illuminated by this infrared light.
2. How do you use a dust sensor?
- Connect the dust sensor to the Arduino. Connect the 3.3V/5V pin on the Arduino board to the Vcc pin on the dust sensor module. Connect the V-LED of the sensor to the 100-ohm resistor. Connect the sensor's LED-GND and S-GND pins to the Arduino's ground pin.
3. How does dust get measured?
- The dust index is then calculated by measuring the light that is diffusely scattered through the foil and calibrating it against the area covered by dust, in percent, as determined by microscopy.
4. Where is the optical dust sensor module most commonly used?
- The module is mainly used for dust removal equipment alarm equipment, air purification equipment, dust robots, fire alarm, etc. industry equipment can detect smoke particles, pollen spores, and other particles. The sensor has a very low current consumption (20mA max, 11mA typical), and can be powered with up to 7VDC.
