Skip to product information
1 of 4

Robocraze

Ultra-silent 4-layer Substrate MKS-LV8729 Stepper Motor Driver with Heat Sink

Ultra-silent 4-layer Substrate MKS-LV8729 Stepper Motor Driver with Heat Sink

Regular price Rs. 639
Regular price Rs. 882 Sale price Rs. 639
Sale Sold out 28% off Best Price Guaranteed
You save Rs. 243
Incl. GST (No Hidden Charges)
Currently, people are actively checking out this product.
Submit your Bulk Enquiry Here

Contact form

  • This is Ultra-silent 4-layer Substrate MKS-LV8729 Stepper Motor Driver with Heat Sink
  • Ultra-silent 4-layer Substrate MKS-LV8729 Stepper Motor Driver Support 6V-36V With Heatsink
  • This can interface directly with 3.3 V and 5 V systems
  • Over-temperature thermal Shutdown, over-current Shutdown and under-voltage lockout
  • Short-to-ground and shorted-load protection

Ultra-silent 4-layer Substrate MKS-LV8729 Stepper Motor Driver with Heat Sink

The Ultra quiet LV8729  4-layer Substrate Stepper Motor Driver Module with 128 subdivisions is used in 3d printers and is a Best suited Moter Driver for Nema stepper motor whose current is less than 1.5A, which makes the motor steady, quiet, and precise.

The LV8729 is a PWM current-controlled micro step bipolar stepping motor driver. This driver can perform eight times of excitation of the second phase to 32W1-second phase and can drive simply by the CLK input.

It has a wide range of Operating voltage range i.e. 6V-36V, the proposed voltage is 12V Support subdivisions of 1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128 with product Process of four-layer PCB board. In the 64 subdivision or 128 subdivision controller, it has a better ultra-quiet effect.

Note: Please make sure the connecting direction is right, or it will probably burn the driver chip and controller board. Recommend doing a good job of cooling the module

Driver current algorithm and its adjustment

  • 1. Driver current algorithm: i=Vref/0.5, the default Vref about 0.4V, so the default current 0.8A, and maximum current 1.5A
  • 2. Please DO NOT connect the motors when measuring the voltage, or it’s easy to burn the drive.
  • 3. Please connect both the power supply and the USB for power when measuring the voltage.
  • 4. Minor adjustment for potentiometer driver. Adjust it again after measurement to avoid burning the driver by excessive current.
  • 5. To increase the current by rotating the potentiometer clockwise slowly, and anticlockwise to reduce.

Package Includes:

  • 1 x Ultra-silent 4-layer Substrate MKS-LV8729 Stepper Motor Driver 4-layer Substrate With Heat Sink

Specifications:

Maximum voltage 36V (usually 12V)
Support subdivision 1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128
Maximum drive current 1.8A 
Dimensions (mm) 20 x 15 x7 
Weight 5g

Shipping & Returns

  • All orders confirmed before 3 pm IST are shipped on the
    same day, barring rare pickup delays on holidays or disturbances
  • Delivery time in Metro cities is 1-3 days, Others it is
    3-7 days. It varies based on location, reliant on courier services
  • Return window: 7 days from receipt unless stated
    otherwise. No refunds/replacements after
  • Returns only for non-working/damaged products are accepted
  • Initiate return requests to our customer service team via Support ticket or contact us at +91-8123057137
  • Refunds are processed within 3-4 working days post inspection and approval.

For more details, please check our Shipping and Return Policy

View full details

People Also Buy

Found a better price?

Let us know!
We'll try to match the price for you

  • ⚡ Dispatched within 24 hours

  • 💰 Earn RC Coins on every purchase

  • 🚚 Free shipping on orders above Rs 500/-

  • 🛠️ Dedicated Technical Support Team

1 of 4

1. How to do Motor Current Limit Setting in MKS-LV8729 Stepper Motor Driver?

  • Current limit can be set by measuring  VREF and an adjustable resistor (see schematic). Connect the voltmeter + to VREF and [-] to  GND and read the value. The LV8729 uses a 0.10 ohm current sense resistor, so the current limit can be calculated as: [current limit = VREF x 2]

Setting a MKS-LV8729 Stepper Motor Driver:
 

Setting a LV8729 Motor Driver Current with Multimeter

 

Note: Please do not exceed the current rating of the motor current, or motor and motor driver will be over-heated, or even damage.

2. What is LV8729 Stepper Motor Driver?

  • The LV8729 is a PWM current controlled bipolar microstepping stepper motor driver. This driver can perform 8 second phase excitation up to 32W 1 second phase and can be easily driven by the CLK input.

Micro-stepping:

MicrostepMS1MS2MS3
Full StepLowLowLow
½ StepHighLowLow
¼ StepLowHighLow
⅛ StepHighHighLow
1/16 StepLowLowHigh
1/32 StepHighLowHigh
1/64 StepLowHighHigh
1/128 StepHighHighHigh